Too many results?  Try our Advanced Product Search

High-Tack Acrylic - Double Coated Tape

Mactac's MP410 high-tack acrylic double coated tapes consist of a thin polyester film coated on both sides with high-tack acrylic pressure sensitive adhesive. These acrylic double coated tapes provide high-initial adhesion and good-shear properties for a wide variety of applications.




  • General Mounting
  • Foam Fabrication
  • Gaskets
  • Insulation Bonding
  • Automotive/Transportation
  • POP/Signage
  • Aerospace

Displaying results 7 to 7 out of 7

< Previous

1

2

Disclaimer Notice

IB4132-80 - MP410 Acrylic 2.4/2.4 .5mil PET 80# NTPK
Double coated .5mil PET, coated on both sides with 2.4mils of MP410 High Tack Acrylic Adhesive. The adhesive is protected by an 80# brown polycoated liner.
 
Performance Guide       Sales Literature       Regulatory Bulletin       Request Sample
 
Adhesive Category High Tack Permanent Adhesive Service Range -40F - 250F
Adhesive Type Permanent Acrylic Ct Wt (mil) 2.4/2.4
Length 750' Liner Category 80# Polycoated Kraft
Width 54"

Displaying results 7 to 7 out of 7

< Previous

1

2

To top

 



IMPORTANT NOTICE:  This information is for reference only. Customer or end user should always test  for suitability of a product for a specific application. Results may vary with substrate variances, dwell time, shape of structure, environmental conditions etc.

Contact MACtac for samples and to discuss your specific application. Information is believed to be accurate and reliable at the time of issuance but no guarantee of accuracy or completeness.